Hikvision Hi-PoE Switches

 Hikvision PoE switches ensure that your system work normally against uneasy environment and provide strong support for data protection. Watch this video and see how Hikvision PoE switches can help handle all potential risks that may occur.

The Hikvsion DS-3E0310HP-E is a long range, 8 port, unmanaged PoE switch. It features one Hi-PoE port, seven PoE ports and two RJ45 ports and can provide long-range access for up to 300m. The first of the ports is the IEEE 802.3bt standard, Hi-PoE port providing a maximum of 60W power supply. This is ideal for high power devices such as Dome IP cameras. With a strong metal casing, fan free design and 6KV surge protection this switch is prepared for use in harsh environments.

Watch This Video

Dahua xvr p2p offline how to slove

P2P troubleshoot on Dahua DVR/NVR

1. Make sure the cabling is okay. Check the connection (cable) from the NVR to the router, ensure that there’s no bad cable or loose connection.
2. Make sure you have a stable internet service.
3. Check if the device’s P2P function is enabled or not. Go to the Main menu > Setting >Network > P2P.

   

   The P2P settings via web browser.

   Untick and tick it again, save the settings and wait if the P2P shows up online. Sometimes you may need to wait 1-3 minutes.

   

   The P2P settings via the recorder’s interface.

4. Make sure that the IP address of the recorder is set on DHCP mode. To enable DHCP go to the Main Menu > Setup > Network > TCP/IP and tick the DHCP (as shown below). On the Preferred DNS: 8.8.8.8 and Alternate DNS: 8.8.4.4. Save the settings.
   
5. Check the information entered on the gDMSS/iDMSS app, make sure the username and password is typed in correctly. Consult this article: How to view Dahua cameras on phone via P2P.
6. Reboot the NVR/DVR and check again.
7. Prefferd Dns same as your Default Gateway enter save
8. In some cases the firmware on the recorder needs to be updated. Get the latest firmware and update the software on your recorder

Watch This video

How to reset the password on XMeye DVR

If you have forgotten or lost the password for XMeye DVR, there’s an easy way to reset the password. This step by step guide will show all the steps you need to undertake in order to reset the password for your H.264 XMeye DVR (sometimes called HD iDVR). In a few words, we will use a password generator to get the right super password.

These H.264 recorders are manufactured by Hangzhou Xiongmai Technology Co and are often sold under other brand names. This method will work and will reset the password, as long as the user interface of your recorder looks the same as the pictures below. So, if you’re not sure about the model of your recorder but the user interface looks the same, then you can use this guide to recover the lost password.

XMeye password reset

Step 1. Go to your DVR and bring up the login screen.
Step 2. Click the ? icon to exit the extra settings.
Step 3. Write down the key number at the bottom left of the screen.
Step 4. Go to the XMeye password generator page and enter the key code (the so called “safe code”).
Step 5. The tool will generate a master password, in our case the master password is 335377.
Step 6. Enter the master password to the recorder.
The XMeye HD iDVR will reboot. Once the machine is back online the old (forgotten) password will be erased. Login by using the username admin and leave the password box empty (blank).

Note: If you can’t Reset password with password like above, Please power off and remove pin CMOS (on motherboard), after power on and login with User: admin, Password: NpSZOo.